SM-8150N Multi-Function Cleaning Machine

SM-8150N Multi-Function Cleaning Machine

This machine apply for cleaning electronic industrial SMT stencils，Misprint PCB ,PCBA and Squeegee. Use water-based clean solvent. With the industry's most advanced cleaning process to achieve 100% cleanliness and environmental protection

The machine consists of a cleaning system, rinsing system, drying system and filtration system.The machine use electricity and compressed air as energy, manually put the stencil /PCBA into the cleaning room, by touch screen set parameters of the cleaning, rinsing, drying and other related, press the start button, the stencil will be automatically cleaned, rinsed and dried.Automatically stop operation when the set cleaning process is finished and reset to achieve the next workflow.The machine is very convenient for cleaning stencils , improve production efficiency and quality.It belongs to a new type, high performance automatic cleaning equipment.The equipment uses water-based liquid cleaning agent and DI water for rinsing, without any safety risks, and no harm to personnel

Description
Detailed
Gallery
Support

◆High Pressure Spraying System for Cleaning Stencil with Water-based Cleaning Fluid

◆Double liquid tank, equipped with heating system, implementation needs cleaning-rinsing-drying

◆Cleaning process: cleaning - chemical isolation - rinsing (open loop/closed loop) - drying.

◆Preparation of advanced automatic touch screen operating software, Program parameters can be saved, Easy to use

◆The counting function of the system can automatically accumulate the number of cleaning stencils and the number of circulating filters

◆Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status in time

◆Spray pressure is monitored by pressure sensor. If the pressure range is set, the alarm will be given

◆Direct reflux of liquid to reduce liquid consumption

◆Integral stainless steel body, strong and durable, resistant to acid, alkali cleaning fluid, etc

◆Rinse water can be filtered by ion to achieve long time zero discharge

◆High-pressure fan + hot air drying, drying effect faster and thorough

◆Lower operating costs, only 50-120 ml of liquid is needed for each cleaning. After cleaning, compressed air is used to recover pipeline and pump residual liquid, which can reduce liquid consumption by 50%

Dimension（mm）	L1300W1400H1850
Applicable stencil size （mm）	L740 W740 H40(max) Special size to be customized
Power supply	AC380V 50HZ
Total power	30KW
Gas source	0.4～0.7Mpa
Source of water	0.2～0.4Mpa
Exhaust port	Ø125
Cleaning/Rinsing liquid tank volume	42L*2PCS（max）
Optimum liquid usage	35L*2PCS
Cleaning fluid isolation time	40S
Clean time	3～8Min
Rinse time	3～10Min
Dry time	3～10Min
Cleaning and rinsing methods	Left and right movable high pressure liquid spray cleaning
Drying method	High pressure hot air shearing (optional super type)
times of rinsing	1-99 times (settable)
Cleaning liquid recovery filtration	Filtration of 5 microns (filtering microorganisms: red gum and contaminants)
Rinsing liquid discharge filtration	Filtration of 5 microns (filtering microorganisms: red gum and contaminants)
Liquid heating temperature	Room Temperature to 60 ℃
DI Water Supply	30～60L/min
DI Water Pressure	0.2--0.4Mpa
DI Water Access Connection Pipeline	3/4 inches
noise	Less than50 decibels
Net Machine Weight	550Kg

product/产品中心

Home > products > SMT Cleaning Machine > Misprint PCB Cleaning > SM-8150N Multi-Function Cleaning Machine

SM-8150N Multi-Function Cleaning Machine

Welcome To Consult

Contact Us