CH  |  EN

product/产品中心

Phone: 0755-27620900

Mail: sales@china-sam.com

Home > products > SMT Cleaning Machine > Nozzle Cleaning > SM-30 Nozzle cleaner

SM-30 Nozzle cleaner

SM-30 suction nozzle cleaning machine adopts multi nozzle spray cleaning method, uses hydrodynamics to break water and produce very small water mist. A powerful kinetic energy is formed by the sound speed and is sprayed on the suction nozzle to form a continuous energy field above the suction nozzle to be cleaned. Smash dirt on the surface and inside of suction nozzle. The machine does not need any solvent and can be cleaned with industrial pure water
Cleaning: the machine is fully automatic and can clean 30 suction nozzles at a time. Different types of suction nozzles are equipped with different tool trays, and suction nozzles of any type of SMT machine can be cleaned. Compressed air will blow dry automatically after cleaning

Inspection: take out the fixture tray and put it on the special suction nozzle inspection device for inspection, and observe the real clean condition of the suction nozzle after cleaning

  • Description
  • Detailed
  • Gallery
  • Support
  • * 30 suction nozzles are cleaned at a time, with short cleaning time and high efficiency 
    * Instead of traditional manual cleaning, solve the problem of ultrasonic cleaning and reduce the phenomenon of chip throwing 
    * Atomized water, supersonic spray cleaning, completely solve the dirt and impurities that cannot be cleaned by ultrasonic

    * It will not be unclean due to the smaller and smaller diameter of suction nozzle 
    * More thorough cleaning, directly extend the life of suction nozzle, and the cleaning rate is more than 99%

    * Easy to operate, the interface can switch between Chinese and English 
    * Never use cleaning agent, only clean with clean water or deionized water

    * Touch screen control interface, easy to understand operation 
    * Suitable for all kinds of applicator nozzles, The cleaning effect of cross, I-shaped and special suction nozzle is more obvious

  • Equipment size

       L× W×H

    440×500 ×530 (mm)

    Equipment weight

    quality

    35KG

    Cleaning liquid

    Type of cleaning fluid

    Industrial purified water

    Consumption

    ≤350CC/H

    Use fluid

    Gas source

    compressed air

    Operating pressure range

    0.5 - 0.65Mpa(When cleaning)

    Injection pressure

    ≤0.4Mpa

    Air consumption

    ≤280ml/min

    Power Supply

    Voltage

    AC220V  50HZ

    Rated power consumption

    Maximum 100W

    Suction tray

    Specifications

             30 PCs

Welcome To Consult

Contact Us

Add: 1 Floor, 13 Building, HongFa Industrial Park, Tangtou Road 91, Shiyan Town, Baoan District, Shenzhen, China

Tel:0755-27620900

Mail:sam888@china-sam.com