SM-8150 Water-based Stencil Cleaning Machine

SM-8150 Water-based Stencil Cleaning Machine

The water-based stencil cleaning machine is mainly aimed at SMT stencil cleaning in the electronic industry using water-based cleaning liquid.

The machine consists of cleaning system, rinsing system, drying system and filtering system. The machine uses electricity and gas as its energy source, and manually puts the stencil into the cleaning room. After setting the cleaning, rinsing, drying and other related parameters by the touch screen, press the start button, and the mesh board will be automatically cleaned, rinsed and dried.

The machine is very convenient for operators to clean the stencil, greatly improving production efficiency and quality. The equipment uses water-based liquid or DI water as cleaning agent, without any potential safety hazards and harmless to personnel.

Description
Detailed
Gallery
Support

◆High Pressure Spraying System for Cleaning Stencil with Water-based Cleaning Fluid

◆Double liquid tank, equipped with heating system, implementation needs cleaning-rinsing-drying

◆Cleaning process: cleaning - chemical isolation - rinsing (open loop/closed loop) - drying.

◆Preparation of advanced automatic touch screen operating software, Program parameters can be saved, Easy to use

◆The counting function of the system can automatically accumulate the number of cleaning stencils and the number of circulating filters

◆Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status in time

◆Integral stainless steel body, strong and durable, resistant to acid, alkali cleaning fluid, etc

◆Rinse water can be filtered by ion to achieve long time zero discharge

◆High-pressure fan + hot air drying, drying effect faster and thorough

◆Lower operating costs, only 50-120 ml of liquid is needed for each cleaning. After cleaning, compressed air is used to recover pipeline and pump residual liquid, which can reduce liquid consumption by 50%

Dimension（mm）	L1600W1160H1920
Applicable stencil size （mm）	L740 W740 H40(max) Special size to be customized
Power supply	AC380V 50HZ
Total power	33KW
Gas source	0.4～0.7Mpa
Source of water	0.2～0.4Mpa
Exhaust port	Ø125
Cleaning/Rinsing liquid tank volume	60L*2PCS（max）
Optimum liquid usage	40L*2PCS
Cleaning fluid isolation time	40S
Clean time	3～8Min
Rinse time	3～10Min
Dry time	3～10Min
Cleaning and rinsing methods	Left and right movable high pressure liquid spray cleaning
Drying method	High pressure hot air shearing (optional super type)
times of rinsing	1-99 times (settable)
Cleaning liquid recovery filtration	Filtration of 5 microns (filtering microorganisms: red gum and contaminants)
Rinsing liquid discharge filtration	Filtration of 5 microns (filtering microorganisms: red gum and contaminants)
Liquid heating temperature	Room Temperature to 60 ℃
DI Water Supply	30～60L/min
DI Water Pressure	0.2--0.4Mpa
DI Water Access Connection Pipeline	3/4 inches
noise	Less than 60 decibels
Net Machine Weight	500Kg

product/产品中心

Home > products > SMT Cleaning Machine > Stencil Cleaning > SM-8150 Water-based Stencil Cleaning Machine

SM-8150 Water-based Stencil Cleaning Machine

Welcome To Consult

Contact Us